Título :	First impressions on three-dimensional printing with earth-based mortar at the Faculty of Engineering of the University of Porto
Autor :	Buson, Márcio Albuquerque Varum, Humberto Rezende, Marco Antônio
metadata.dc.identifier.orcid:	https://orcid.org/0000-0002-4221-6673 https://orcid.org/0000-0003-0215-8701
metadata.dc.contributor.affiliation:	University of Brasilia, Faculty of Architecture and Urbanism University of Porto, Faculty of Engineering, CONSTRUCT-LESE Federal University of Minas Gerais, Architecture School
Assunto::	Impressão 3D Argamassa à base de terra Arquitetura Acabamentos suaves e texturizados
Fecha de publicación :	23-ene-2023
Editorial :	MDPI
Citación :	BUSON, Márcio; VARUM, Humberto; REZENDE, Marco Antônio. First impressions on three-dimensional printing with earth-based mortar at the Faculty of Engineering of the University of Porto. Buildings, 14, 312, 2024. DOI: https:// doi.org/10.3390/buildings14020312. Disponível em: https://www.mdpi.com/2075-5309/14/2/312. Acesso em: 27 maio 2024.
Abstract:	Three-dimensional (3D) printing with earth-based mortar is still under development and faces challenges. Optimising the mortar mixture, improving structural strength, determining the relationship between the printing speed and the amount of extruded material, and ensuring long-term durability are areas that are being refined. Additionally, regulatory and certification issues must also be considered to ensure the safety and compliance of 3D printed structures. This paper presents for discussion the records, analyses, studies, and considerations regarding initial initiatives involving 3D printing with the extrusion of earth-based mortar developed at the Faculty of Engineering of the University of Porto (FEUP). Through this work, it was possible to strengthen and reaffirm that 3D printing with earth-based mortar has significant potential in the construction industry and that the incorporation of dispersed kraft paper fibres from the recycling of cement bags is an excellent resource to achieve good constructability in 3D printing with earth-based mortar. Keywords: three-dimensional (3D) printing; earth-based mortar; earth architecture; smooth and textured finishes
metadata.dc.description.unidade:	Faculdade de Arquitetura e Urbanismo (FAU) Departamento de Tecnologia em Arquitetura e Urbanismo (FAU TEC)
Licença::	(CC BY) Copyright: © 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/).
DOI:	https:// doi.org/10.3390/buildings14020312
Aparece en las colecciones:	Artigos publicados em periódicos e afins

Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.