http://repositorio.unb.br/handle/10482/39954
Título : | Combined thermo-acoustic upgrading of solid fuel : experimental and numerical investigation |
Autor : | Galvão, Luiz Gustavo Oliveira Chaves, Bruno Sant'Anna Morais, Marcus Vinícius Girão de Vale, Ailton Teixeira do Caldeira-Pires, Armando de Azevedo Rousset, Patrick Silveira, Edgar Amaral |
Assunto:: | Biomassa Catálise Eucalipto Modelagem Torrefação |
Fecha de publicación : | jul-2020 |
Editorial : | ETA-Florence Renewable Energies |
Citación : | GALVÃO, Luiz Gustavo O. et al. Combined thermo-acoustic upgrading of solid fuel: experimental and numerical investigation. In: EUROPEAN BIOMASS CONFERENCE AND EXHIBITION, 28th., 2020, virtual. Proceedings [...]. Florence: ETA-Florence Renewable Energies, 2020. Disponível em: http://www.etaflorence.it/proceedings/?detail=17309. |
Abstract: | Torrefaction is a thermal modification used to the enhancement of fuel characteristics. This paper describes the effect of an innovative thermo-acoustic torrefaction reactor on the physical and chemical properties of torrefied Eucalyptus grandis wood. The aim was to evaluate the combined effect of the temperature (250 and 270 °C) and acoustic frequencies (1411,1810,2478 and 2696 Hz) by the assessment of the solid yield and its deviation, proximate and elemental analysis as well as energy content. A numerical model of kinetics reaction rates and solid composition allowed the evaluation of the thermo-acoustic torrefaction experiment showing faster reaction rates for treatments under acoustic. Statistical analysis results indicated that the applied frequencies affect the higher heating value but did not significantly affect the other parameters. However, its dynamic profiles show that acoustic may accelerate the degradation process. The kinetic numerical simulation of the acoustic coupling resulted in faster conversion rates for the solid pseudo-components leading to a stronger degradation of the intermediate product. |
metadata.dc.description.unidade: | Faculdade de Tecnologia (FT) Departamento de Engenharia Mecânica (FT ENM) |
DOI: | 10.5071/28thEUBCE2020-3DO.6.2 |
metadata.dc.relation.publisherversion: | http://www.etaflorence.it/proceedings/?detail=17309 |
Aparece en las colecciones: | Trabalhos apresentados em evento |
Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.