Título :	Application of process mapping for digitization of mechanical parts with 3D laser scanner
Autor :	Piratelli Filho, Antonio Álvares, Alberto José Valdés Arencibia, Rosenda
Assunto::	Mapeamento de processos Metodologia IDEFØ Planejamento de medições Modelagem CAD
Fecha de publicación :	2018
Editorial :	International Journal of Metrology and Quality Engineering (IJMQE)
Citación :	PIRATELLI FILHO, Antonio; ALVARES, Alberto José; VALDÉS ARENCIBIA, Rosenda. Application of process mapping for digitization of mechanical parts with 3D laser scanner. International Journal of Metrology and Quality Engineering, v. 9, n. 11, 2018. Disponível em https://www.metrology-journal.org/articles/ijmqe/abs/2018/01/contents/contents.html. Acesso em: 04 abr. 2019.
Abstract:	This work presents a systematization method for digitization of mechanical parts with threedimensional (3D) laser scanner using the process mapping method. The application involves the use of the IDEFØ methodology of process mapping to address the sequence of steps required to obtain the computer-aided design (CAD) model of the measured part. The variables involved in the setup and measurement with 3D laser scanner were investigated and applied to regular and free-form parts, and the parameter geometry, texture, light reflection and procedure of data acquisition were considered in the analysis. The software commands used to create the CAD models were also included and the ones related to mesh and surface creation were detailed. The systematized measurement planning was graphi graphically presented, and it proved useful to operators during the digitization process.
Licença::	This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
DOI:	https://doi.org/10.1051/ijmqe/2018009
Aparece en las colecciones:	Artigos publicados em periódicos e afins

Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.