Skip navigation
Please use this identifier to cite or link to this item: http://repositorio.unb.br/handle/10482/30363
Files in This Item:
File SizeFormat 
ARTIGO_CharacterizationCopperMicroelectrodes.pdf472,47 kBAdobe PDFView/Open
Title: Characterization of copper microelectrodes, following a homemade lithography, technique, and gold electroless deposition
Authors: Rodríguez Martínez, Marco Antonio
Felix, Lizbet Leon
Valladares, Luis de los Santos
Dominguez, Angel Bustamante
Huamaní Coaquira, José Antonio
Alvarado, Jorge Rojas
Majima, Yutaka
Aguiar, Jose Albino
Barnes, Crispin
Assunto:: Processos químicos
Oxidação
Issue Date: Jan-2016
Publisher: Rede Latino-Americana de Materiais
Citation: MARTINEZ, Marco Antonio Rodriguez et al. Characterization of copper microelectrodes, following a homemade lithography, technique, and gold electroless deposition. Matéria (Rio de Janeiro), Rio de Janeiro, v. 21, n. 1, p. 252-259, jan./mar. 2016. Disponível em: <http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1517-70762016000100024&lng=en&nrm=iso>. Acesso em: 20 dez. 2017. doi: http://dx.doi.org/10.1590/S1517-707620160001.0023.
Abstract: We report the fabrication and characterization of copper microelectrodes obtained by a homemade lithography technique and after gold electroless deposition. For the fabrication, planes consisting of arrays of electrodes (black in color) with bow tie shape were designed and printed on a transparent paper (Canson ltd.). Using an embroidery frame with a silk fabric, a photographic emulsion was spread on the silk and simultaneously pressing the Canson paper on it. The system was introduced into a closed box and exposed with a UV light. The designed electrode templates prevented direct exposition of the UV light over copper films and indelible ink was spread over it. After the ink was dried, the copper film is immersed into ferric acid to attack the uncovered copper parts (where there is no ink). In this way, we obtained copper electrodes with initial gap separation of ~142μm and subsequently, they followed electroless deposition of gold to make the copper electrodes to contact. For the characterization, electrical measurements were performed. They present ohmic resistance values in the order of 106 Ω produced by surface scattering of the electrons within the gold microwire and enhanced by oxidation of the copper electrodes.
Licença:: Matéria (Rio de Janeiro) - This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0). Fonte: http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1517-70762016000100024&lng=en&nrm=iso. Acesso em: 20 dez. 2017.
DOI: http://dx.doi.org/10.1590/S1517-707620160001.0023
Appears in Collections:Artigos publicados em periódicos e afins

Show full item record " class="statisticsLink btn btn-primary" href="/jspui/handle/10482/30363/statistics">



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.